Patented Technology
airDefender uses the quantum dot photocatalyst produced by self-assmbling synthesis technology, which decomposes formaldehyde and TVOC and inhibits bacteria as well as germs growth.
The advantages of quantum photocatalyst are as follofws:
Titanium Dioxide is used as airDefender®️ quantum photocatalyst. Titanium Dioxide is a naturally occurring oxide of titanium. Approved by FDA, it is considered harmless to humans and widely-used both as a food additive and in many day-to-day applications. Titanium Dioxide causes a reaction that creates Hydroxil radicals. These tiny, highly reactive radicals surround and destroy germs, keeping you and your family safe.
This technology has been researched by NASA for its application in air and water purification. In the research, the chemical solvent used by airDefender®️ was found to be 40 times more effective than other traditional nano products on the market.
The technology has been proven effective against 99% of virus and bacteria.
1. QUANTUM DOT NANOCRYSTALS −"ONE-DIMENSIONAL" MATERIALS
Nanomaterials (usually <100nm) have a higher specific surface area. With advanced self-assembling synthesis technology, we were able to reduce the size of the nanocrystals to 5-8nm with a crystallinity as high as 99%. This material is called quantum dot material. The quantum effect can improve the product performance so it is known as "one-dimensional" materials, new materials that are closest to the origin.
2. MULTI-ACTIVE CRYSTAL STRUCTURE DESIGN
The uniquely designed non-spherical crystal structure can adapt to the natural structure of the crystal by bringing more active bonds and obtaining the excellent multi-active catalyst crystal by greatly increasing the reaction performance thereby further improving the product utility.
3. SUPER MESOPOROUS FILM
A special form of Quantum Photocatalytic Mesoporous film coating after dry penetration has a porosity of up to 80%. It improves the probability of nanoparticle contact with contaminants. The surface area of the nanomaterials not only enhances the reaction rate. Moreover, high porosity can reduce the refraction of the protective film. Thus, the protective film has high transparency.
4. LOW-TEMPERATURE SOL CONDENSATION CRYSTALLIZATION TECHNOLOGY
The active crystalline product with photocatalytic property is prepared by traditional sol condensation technique at high temperature, and the process of refining will produce a slurry-side effect such as oxidation and adverse photocatalytic effect. The results show that the low-temperature sol crystallization technology can reduce the adverse factors caused by high-temperature refining, better results, and innovation.
5. HYDROSOL SAFETY AND STABILITY
Stabilization of particles through unique techniques, the product does not require surfactants, strong acid, or strong alkali. Alcohol or other additives can obtain very strong stability in water, has no corrosion to most things, and it is absolutely safe. The Photocatalyst product is different from powder trench manufacture.
6. IMPROVING INDOOR LIGHT DECOMPOSITION EFFECT
The Quantum Photocatalysts use nitrogen doping technology to increase the blue light absorption, to form a visible response, to improve visible light performance without affecting the performance of UV light.
7. NASA EXCELLENT EVALUATION PERFORMANCE
At the 44th International Conference on Environmental Systems (ICES), the NASA study indicates that this product is the top 3 among 47 products of the same class. The product can be used in visible light conditions, and the decomposition rate of 4-chlorophenol (4-chlorophenol) is higher than the traditional catalysts in the market by 38 times.